-

From $74.99
Automate your irrigation with these Netafim 0.3 GPH (1.2 L/H) drip emitters. These stakes and tubes come pre-assembled and are available in bundles of 50 or 100.
- Netafim Woodpecker Jr Drippers
- .3 GPH Flow Rate ( 1.2 L/H )
- PC Check Valve
- 36″ of white Super Flex PE Tubing
- 5″ angled stake on the end
-

$239.00
- 24V Rainbird irrigation valve
- 15 psi pressure regulator
- Netafim 100 micron filter
- PVC fitting to take you from your manifold down to your solenoid.
- Hose loc Connectors
- All Hose Loc connectors for a rectangle or square table:
- tecklock connector to PVC
- (4) hose lock Elbows
- (2) hose lock Ts
- 1 automatic flush valve
- 3/4 Camlock with flexible hose for rolling benches
-
Sale!

From $229.00
Leader Ecotronic pumps are highly reliable electronic booster sets for supplying water for domestic applications. Leader Ecotronic pumps are equipped with an electronic safety device that protects the pump from dry-running. Leader Ecotronic water pumps have a built-in non-return valve. Designed to automatically start and stop the pump when taps are open or closed. Automatic…
-

$44.99
This is the Netafim tubing needed to complete your irrigation kits. This Netafim tubing goes around your table, zone, or plants and allows you to connect your emitters into the poly line.
-

$9.99
A must-have for setting up your grow tables – the Blue Plastic Handle Punch tool for punching holes for .160″ Micro Fittings. Punch holes in your irrigation tubing for your stake and tube emitters.
-

$65.00
Replacement Rainbird 24v irrigation valve. Don’t get caught empty-handed; always keep 1-2 backup irrigation valves just in case one fails on you.
YOU MUST HAVE A TROLMASTER AQUA X Package to use power whipped kits or other irrigation controller system.
Comes with 1 PVC fitting on each side converting to 3/4″
-

$49.00
Craft Farmer Canada Table Kit. You need this if you want to have a drip system on your tables.
Comes with:
pipe clamps for 3/4” PVC
(2) Hose Loc Ts
(4) Hose Loc Elbows
PVC fittings to go up to your whip kit
Automatic Flush valve
You must have one kit per table.
Just add your Netafim tubing and drip emitters
-

From $73.50
This kit comes with your table fittings and all the parts for 2 drain zones and a 1 zone add on. 1 inch hoses
Great for use with almost all flood trays.
All parts are Canadian purchased and now come with white flexible PVC hose that glues directly into standard PVC fittings.
Sold in either a 2-zone or 1-zone add on kit.
-

From $129.00
This is the perfect water evacuation kit to pair with a sump pump. Pair this kit with the yellow Mondi sump pump. It allows you to run the Mondi off of the float switch in the kit.
The kit comes with a float kit, Union for quick disconnect, A one-way check valve, and two pieces of 3/4” PVC. One with a pre-drilled weep hole, so you don’t get airlock.
This kit allows you to pump out any water that is drained from your tables, dehumidifier, or any other water source.